{"title":"Copper Waterblocks","description":"","products":[{"product_id":"wba-0-60-0-28-cu-01-mini-water-block-0-6-x-0-6-x-0-28-copper","title":"WBA-0.60-0.28-CU-01 Mini Water Block 0.6 x 0.6 x 0.28\" Copper","description":"\u003cp\u003e\u003cstrong\u003eMini Micro Liquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-0.60-0.28-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 0.59 x 0.59 x 0.28\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 15 x 15mm (.59 x .59 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003eCopper tube for inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003cli\u003eSolder brazed construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, lasers, power electronics, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 0.59 x 0.59 x 0.28 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 0.59 x 0.59 inches (15 x 15 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 0.292 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting holes tapped for 2-56 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e0.156\" OD copper tubing for inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eUse 0.125\" ID flexible tubing to connect.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 15 x 15mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 15 x 15mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of Copper 110 alloy.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e120 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eThis liquid cold plate or water block is considered a mini or miniature liquid cooled cold plate. Custom versions can be made. Please contact us for a quote on your specific requirements.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50904425333047,"sku":"WBA-0.60-0.28-CU-01","price":45.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-0.60-0.28-cu_render_assembly_1200x1093_526bc930-2fb0-4883-ace1-18e100ed2641.jpg?v=1754260890"},{"product_id":"wba-1-00-0-60-cu-ch-water-block-1-0-x-1-0-x-0-60-copper","title":"WBA-1.00-0.60-CU-CH Water Block 1.0 x 1.0 x 0.60\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.00-0.60-CU-CH\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.0 x 1.0 x 0.60\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 25.4 x 25.4mm (1.0 x 1.0 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet on top face.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.0 x 1.0 x 0.49 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 1.0 x 1.0 inches (25.4 x 25.4 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 1.61 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the top face.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cooling plate will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 25 x 25mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 25 x 55mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Copper.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50904435032375,"sku":"WBA-1.00-0.60-CU-CH","price":107.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.00-0.60-cu-ch_render_assembly_1093x1093_1.jpg?v=1754261481"},{"product_id":"wba-1-00-0-49-cu-01-water-block-1-0-x-1-0-x-0-49-copper","title":"WBA-1.00-0.49-CU-01 Water Block 1.0 x 1.0 x 0.49\" Copper","description":"\u003cp\u003e\u003cstrong\u003eMini Micro Liquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.00-0.49-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.0 x 1.0 x 0.49\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 25.4 x 25.4mm (1.0 x 1.0 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.0 x 1.0 x 0.49 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 1.0 x 1.0 inches (25.4 x 25.4 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 1.61 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 25 x 25mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 25 x 55mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Copper.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963589169463,"sku":"WBA-1.00-0.49-CU-01","price":96.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.0-cu_1000.jpg?v=1755456199"},{"product_id":"wba-1-25-0-50-cu-np-water-block-1-25-x-1-25-x-0-50-copper","title":"WBA-1.25-0.50-CU-NP Water Block 1.25 x 1.25 x 0.50\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.25-0.50-CU-NP\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.25 x 1.25 x 0.50\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 31.7 x 31.7mm (1.25 x 1.25 inches) on each side.\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon or Stainless Steel barbed fittings for 1\/4\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] and then Nickel plated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cp\u003eVery high surface area internal flow path for maximum heat transfer.\u003cbr\u003eMeasures: 1.25 x 1.25 x 0.50 inches.\u003cbr\u003eUsable flat area of 1.25 x 1.25 inches (31.7 x 31.7 mm) per side.\u003cbr\u003eInlet and Outlet on the same side.\u003cbr\u003e1\/8\" NPT threaded inlet and outlet.\u003cbr\u003eOption to add 2 pieces of Nylon barbed fittings for 1\/4\" ID tubing.\u003cbr\u003eMaximum service temperature is 150 C.\u003cbr\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/p\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cp\u003eAny object to be cooled up to 31.7 x 31.7mm.\u003cbr\u003eSingle TECs or TEGs up to 31.7 x 31.7mm.\u003c\/p\u003e\n\u003cp\u003eCNC machined from solid Copper and then Nickel plated.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to 200 watts. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964537606455,"sku":"WBA-1.25-0.50-CU-NP","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.25-0.5-cu-np_1000.jpg?v=1755482409"},{"product_id":"wba-1-62-0-55-cu-01-water-block-1-62-x-1-62-x-0-55-copper","title":"WBA-1.62-0.55-CU-01 Water Block 1.62 x 1.62 x 0.55\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.62-0.55-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.62 x 1.62 x 0.55\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eEach side has usable area of 41.0 x 41.0mm (1.62 x 1.62 inches).\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eWeight: 160g (0.353 lb)\u003c\/li\u003e\n\u003cli\u003eTotal External surface Area: 9.285 in\u003csup\u003e2\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e(59.9 cm\u003csup\u003e2\u003c\/sup\u003e)\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.62 x 1.62 x 0.55 inches.\u003c\/li\u003e\n\u003cli\u003eEach side usable flat area of 1.62 x 1.62 inches (41.0 x 41.0 mm).\u003c\/li\u003e\n\u003cli\u003eBoth sides may be used at the same time.\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 0.360 inches\u003csup\u003e3\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e(5.90 cm\u003csup\u003e3\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eor ml)\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eSolder brazed 100 psi watertight seal.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis aluminum liquid cold plate waterblock will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 41 x 41mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 20 x 20mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964543537463,"sku":"WBA-1.62-0.55-CU-01","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wb-1.62-1.62-block_cover-2_600_1.jpg?v=1755482629"},{"product_id":"wba-3-00-0-90-cu-2g-2nd-generation-water-block-3-0-x-3-0-x-0-90-copper","title":"WBA-3.00-0.90-CU-2G 2nd generation Water Block 3.0 x 3.0 x 0.90\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.90-CU-2G\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.90\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 771gm (1.70 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2nd Generation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesign with improved flow path, reduced pressure drop, and lighter in weight.\u003c\/li\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 3.0 x 3.0 x 0.90 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 2.67 cubic inches, 43.77 ml.(cm3)\u003c\/li\u003e\n\u003cli\u003e8 mounting holes tapped for 6-32 screws\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis waterblock will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 65 x 65mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid 99.9% pure copper.\u003c\/p\u003e\n\u003cp\u003eThis copper liquid cold plate waterblock has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eStandard\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eO-ring\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ematerial is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us if you need other materials.\u003c\/p\u003e\n\u003cp\u003eClick here to see\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/customthermoelectric.com\/catalogsearch\/result\/?q=WBO-3.0\" target=\"_blank\"\u003e3.0 Inch O-rings\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall or Email us for custom options or to create custom Liquid Cold Plates for you.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964572864823,"sku":"WBA-3.00-0.90-CU-2G","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-3.00-0.90-cu-2g_render_assembly_iso_1550x1236_944e6f76-d938-49c9-af18-98bd1855cfb9.jpg?v=1755483347"},{"product_id":"wba-4-0-0-92-cu-01-water-block-4-0-x-4-0-x-0-92-copper","title":"WBA-4.0-0.92-CU-01 Water Block 4.0 x 4.0 x 0.92\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.90-CU-2G\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.90\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 771gm (1.70 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper.\u003c\/li\u003e\n\u003cli\u003eMeasures: 4.0 x 4.0 x 0.92 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 3.54 x 3.54 inches (90 x 90 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is XXX ml.\u003c\/li\u003e\n\u003cli\u003e10 mounting holes tapped for 6-32 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on opposite sides.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWill accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 40 x 40mm.\u003c\/li\u003e\n\u003cli\u003e2 to 8 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of copper with an O-ring seal. Internal flow path is easily serviceable by removing screws and cover.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964582203703,"sku":"WBA-4.0-0.92-CU-01","price":301.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-4.0-0.9-al-01_500_1_3.jpg?v=1755483725"}],"url":"https:\/\/efc0ce.myshopify.com\/collections\/copper-waterblocks.oembed","provider":"Custom Thermoelectric","version":"1.0","type":"link"}