{"title":"Water Blocks \/ Liquid Cold Plates","description":"\u003cstyle\u003e\n.flex-container {\n  display: flex;\n  justify-content: center;\n  flex-wrap: wrap;\n  background-color: none;\n}\n\n.flex-container \u003e div {\n  background-color: none;\n  width: 150px;\n  margin: 25px;\n  text-align: center;\n  line-height: 12px;\n  font-size: 12px;\n}\n\n\u003c\/style\u003e\n\u003cp\u003eWater blocks, also known as Liquid Cold Plates, are the most efficient method of heat removal. They are often 4-5 times more efficient compared to a standard air cooled heat sink and fan. The principle is simple: you provide a source of cool liquid (typically water, or ethylene glycol\/water, or Fluorinert) to the inlet of the water block. The liquid travels back and forth through the various chambers of the water block thereby absorbing the heat from the TECs or power electronics. The warmer liquid then exits the water block. The source of the liquid can be;\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eChiller Liquid - A pre-chilled Liquid (typically alcohol, water\/glycol, oil, or a dielectric fluid such as Fluorinert) from a recirculating chiller passes through the water block and then is returned to the chiller for re-cooling. This is a closed loop system.\u003c\/li\u003e\n\u003cli\u003eRadiator closed loop - a liquid enters the water block at close to ambient air temperatures. The exiting warm liquid then goes to a fan cooled radiator of sufficient size to cool the liquid back down to ambient air temperature. The liquid is then sent back through the water block, This is a closed loop system.\u003c\/li\u003e\n\u003cli\u003eBuilding (tap) water - This water is usually cooler than the ambient air temperature. The warmer exiting water can be sent to a drain or re-used in a number of ways.\u003c\/li\u003e\n\u003cli\u003eWell water, lake, or stream water - This water usually requires pre-filtering but can be substantially colder than ambient air temperature, especially during winter months. Exiting water can either be returned to the source or re-used. This is an especially useful method for Off Grid locations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid cold plates are usually made from either Aluminum or Copper due to their high thermal conductivity.  Aluminum liquid blocks are a good all purpose material choice and will suit most needs.  Copper liquid cold plates have a thermal advantage in a greater ability to move heat.  In addition, it is best to NOT mix metals in a liquid cooling loop as this may cause galvanic corrosion.  If you already have brass and\/or copper fittings then use a copper cold plate.  If you have aluminum, stainless steel, and nickel fittings, then use an aluminum liquid cold block.  All of our aluminum liquid cold plates are anodized for corrosion protection.  Our copper cold blocks are supplied uncoated (raw) but can be plated if needed.  Please call or email for further information.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/customthermoelectric.com\/tech-info\/faq\/water-block-faq.html\" title=\"Water Cooling plates or Water Blocks\" target=\"_blank\"\u003eFAQ on Water Blocks \/ Liquid Cooling Blocks.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLiquid cooling plates ( Water Blocks ) are used as a cooling solution for TECs, TEGs, IGBTs, MOSFETS, thyristors, SiC, data centers, EV\/HEV, alternate energy, battery systems, power electronics and anything that needs a compact highly efficient means of heat removal.\u003c\/p\u003e\n\u003cp\u003eLiquid cold plates can also be used in a reverse purpose.  By cooling the block or plate with Peltier devices (or a compressor based refrigeration system), any liquid that is passed through the plate becomes chilled.  This is the basis behind making a chiller system. Many customers have used this method of regulating the temperature of a desired liquid or gas before it is subjected to analysis. By using thermoelectric devices, the temperature of the fluid can be either heated or cooled to a specific temperature.\u003c\/p\u003e\n\u003cp\u003eWater Blocks are also called; Liquid Cold Plate, Water Cooled Plate, Liquid Chassis, Liquid Cooling Plate, Water Cooling Block, Cold Plates, Liquid Cooled Baseplate, and many others and are all the same basic device that uses a liquid to keep it cool.\u003c\/p\u003e\n\u003c!------------------------------------------\u003e\n\u003cdiv class=\"flex-container\"\u003e\n\u003cdiv\u003e\u003ca href=\"\/collections\/copper-waterblocks\" title=\"Copper Water Blocks\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/menu_water_blocks.jpg?v=1750968156\" alt=\"image of Copper Water Block\"\u003eCopper Water Blocks\u003c\/a\u003e\u003c\/div\u003e\n\u003c!------------------------------------------\u003e\n\u003cdiv\u003e\u003ca href=\"\/collections\/aluminum-waterblocks\" title=\"Aluminum Water Blocks\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-4.00-0.92-al-cc_assembled_2560x1600_f0c7e88b-9f96-42ad-9163-065c3ce3394a.jpg?v=1755483933\" alt=\"image of Aluminum Water Block\"\u003eAluminum Water Blocks\u003c\/a\u003e\u003c\/div\u003e\n\u003c!------------------------------------------\u003e\n\u003cdiv\u003e\u003ca href=\"\/collections\/waterblock-accessories\" title=\"Water Block Accessories\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/menu_waterblocks_water_block_accessories_150.jpg?v=1755484635\" alt=\"image of Water Block Accessories\"\u003eWater Block Accessories\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e","products":[{"product_id":"wba-0-60-0-28-cu-01-mini-water-block-0-6-x-0-6-x-0-28-copper","title":"WBA-0.60-0.28-CU-01 Mini Water Block 0.6 x 0.6 x 0.28\" Copper","description":"\u003cp\u003e\u003cstrong\u003eMini Micro Liquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-0.60-0.28-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 0.59 x 0.59 x 0.28\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 15 x 15mm (.59 x .59 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003eCopper tube for inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003cli\u003eSolder brazed construction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, lasers, power electronics, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 0.59 x 0.59 x 0.28 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 0.59 x 0.59 inches (15 x 15 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 0.292 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting holes tapped for 2-56 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e0.156\" OD copper tubing for inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eUse 0.125\" ID flexible tubing to connect.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 15 x 15mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 15 x 15mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of Copper 110 alloy.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e120 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eThis liquid cold plate or water block is considered a mini or miniature liquid cooled cold plate. Custom versions can be made. Please contact us for a quote on your specific requirements.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50904425333047,"sku":"WBA-0.60-0.28-CU-01","price":45.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-0.60-0.28-cu_render_assembly_1200x1093_526bc930-2fb0-4883-ace1-18e100ed2641.jpg?v=1754260890"},{"product_id":"wba-1-00-0-60-cu-ch-water-block-1-0-x-1-0-x-0-60-copper","title":"WBA-1.00-0.60-CU-CH Water Block 1.0 x 1.0 x 0.60\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.00-0.60-CU-CH\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.0 x 1.0 x 0.60\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 25.4 x 25.4mm (1.0 x 1.0 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet on top face.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.0 x 1.0 x 0.49 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 1.0 x 1.0 inches (25.4 x 25.4 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 1.61 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the top face.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cooling plate will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 25 x 25mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 25 x 55mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Copper.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50904435032375,"sku":"WBA-1.00-0.60-CU-CH","price":107.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.00-0.60-cu-ch_render_assembly_1093x1093_1.jpg?v=1754261481"},{"product_id":"wbf-1-16-3-16-ny-barbed-tube-fitting","title":"WBF-1.16-3.16-NY Barbed Tube Fitting","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-1.16-3.16-NY\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 1\/16\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 3\/16\" ID flexible tubes\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 150 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40 to 80°C (-40 to 175°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: Nylon\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing\u003c\/li\u003e\n\u003cli\u003eTubing: Use with firm (Shore A75 - A80) PVC or polyurethane\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963482935607,"sku":"WBF-1.16-3.16-NY","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/black-nylon-barbed-fitting_150.jpg?v=1755453410"},{"product_id":"wbf-1-4-1-2-br-barbed-tube-fitting","title":"WBF-1.4-1.2-BR Barbed Tube Fitting","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-1.4-1.2-BR\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 1\/2\" ID flexible tubes or hoses\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 250 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40 to 90°C (-40 to 195°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003cli\u003eColor: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing or hose\u003c\/li\u003e\n\u003cli\u003eTubing\/hose: Use with soft and firm reinforced plastic or reinforced rubber\u003c\/li\u003e\n\u003cli\u003eUse band clamps or worm drive hose clamps\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963483754807,"sku":"WBF-1.4-1.2-BR","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/brass-barbed-fitting_300.jpg?v=1755453614"},{"product_id":"wbf-1-8-1-4-ny-barbed-tube-fitting","title":"WBF-1.8-1.4-NY Barbed Tube Fitting","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-1.8-1.4-NY\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 1\/8\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 1\/4\" ID flexible tubes\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 150 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40 to 80°C (-40 to 175°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: Nylon\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing\u003c\/li\u003e\n\u003cli\u003eTubing: Use with firm (Shore A75 - A80) PVC or polyurethane\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963492077879,"sku":"WBF-1.8-1.4-NY","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/black-nylon-barbed-fitting_150.jpg?v=1755453410"},{"product_id":"wbf-1-8-1-4-ss-barbed-tube-fitting","title":"WBF-1.8-1.4-SS Barbed Tube Fitting","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-1.8-1.4-SS\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 1\/8\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 1\/4\" ID flexible tubes\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 275 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -29 to 400°C (-20 to 750°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: 303 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eColor: Stainless Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing\u003c\/li\u003e\n\u003cli\u003eTubing: Use with soft and firm (Shore A65 - A90) PVC or polyurethane\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963494011191,"sku":"WBF-1.8-1.4-SS","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/stainless-steel-barbed-tube-fitting_150.jpg?v=1755453957"},{"product_id":"wbf-3-8-1-2-br-barbed-tube-fitting","title":"WBF-3.8-1.2-BR Barbed Tube Fitting","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-3.8-1.2-BR\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 3\/8\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 1\/2\" ID flexible tubes or hoses\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 250 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40 to 90°C (-40 to 195°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003cli\u003eColor: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing or hose\u003c\/li\u003e\n\u003cli\u003eTubing\/hose: Use with soft and firm reinforced plastic or reinforced rubber\u003c\/li\u003e\n\u003cli\u003eUse band clamps or worm drive hose clamps\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963497484599,"sku":"WBF-3.8-1.2-BR","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/brass-barbed-fitting_300.jpg?v=1755453614"},{"product_id":"wbo-3-0-bnn-o-ring-wba-3-0-series-buna-n","title":"WBO-3.0-BNN O-ring WBA-3.0 series Buna N","description":"\u003cp\u003e\u003cstrong\u003eBarbed Tube Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU\/Part #: WBF-3.8-1.2-BR\u003c\/li\u003e\n\u003cli\u003eThreaded male on one end to fit 3\/8\" NPT\u003c\/li\u003e\n\u003cli\u003eBarbed on the other end to fit 1\/2\" ID flexible tubes or hoses\u003c\/li\u003e\n\u003cli\u003eMaximum pressure @72F 250 PSI\u003c\/li\u003e\n\u003cli\u003eTemperature range: -40 to 90°C (-40 to 195°F)\u003c\/li\u003e\n\u003cli\u003eMaterial: Brass\u003c\/li\u003e\n\u003cli\u003eColor: Brass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlexible tubing or hose\u003c\/li\u003e\n\u003cli\u003eTubing\/hose: Use with soft and firm reinforced plastic or reinforced rubber\u003c\/li\u003e\n\u003cli\u003eUse band clamps or worm drive hose clamps\u003c\/li\u003e\n\u003cli\u003eFor connecting flexible tubing to a water block or other accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963499024695,"sku":"WBO-3.0-BNN","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-3-0-bnn-2g-o-ring-2nd-generation-wba-3-0-series-buna-n","title":"WBO-3.0-BNN-2G O-ring 2nd generation WBA-3.0 series Buna N","description":"\u003cp\u003eReplacement O-ring for the standard o-ring in all WBA-3.0 series water blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Buna N rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -29 to 120°C (-20 to 250°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcetic Acid\u003c\/li\u003e\n\u003cli\u003eAmmonia\u003c\/li\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003ePotassium Hydroxide\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003cli\u003eWater\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963502235959,"sku":"WBO-3.0-BNN-2G","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-3-0-sil-o-ring-wba-3-0-series-silicone","title":"WBO-3.0-SIL O-ring WBA-3.0 series Silicone","description":"\u003cp\u003eAlternate O-ring for all WBA-3.0 series water blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Silicone rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -51 to 232°C (-60 to 450°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963506463031,"sku":"WBO-3.0-SIL","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-3-0-sil-2g-o-ring-2nd-generation-wba-3-0-series-silicone","title":"WBO-3.0-SIL-2G O-ring 2nd generation WBA-3.0 series Silicone","description":"\u003cp\u003e\u003cspan\u003eAlternate O-ring for all 2nd generation WBA-3.0 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Silicone rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -51 to 232°C (-60 to 450°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963516653879,"sku":"WBO-3.0-SIL-2G","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-3-0-vtn-o-ring-wba-3-0-series-viton","title":"WBO-3.0-VTN O-ring WBA-3.0 series Viton","description":"\u003cp\u003eAlternate O-ring for all WBA-3.0 series water blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Viton Fluoroelastomer rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -18 to 204°C (0 to 400°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBenzene\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eNitric Acid\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eTransmission Fluid\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963518783799,"sku":"WBO-3.0-VTN","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-4-0-vtn-o-ring-wba-4-0-series-viton","title":"WBO-4.0-VTN O-ring WBA-4.0 series Viton","description":"\u003cp\u003eAlternate O-ring for all WBA-4.0 series water blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Viton Fluoroelastomer rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -18 to 204°C (0 to 400°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBenzene\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eNitric Acid\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eTransmission Fluid\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963523404087,"sku":"WBO-4.0-VTN","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-5-75-vtn-o-ring-wba-5-75-series-viton","title":"WBO-5.75-VTN O-ring WBA-5.75 series Viton","description":"\u003cp\u003eAlternate O-ring for all WBA-5.75 series water blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Viton Fluoroelastomer rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -18 to 204°C (0 to 400°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBenzene\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eNitric Acid\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eTransmission Fluid\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963527303479,"sku":"WBO-5.75-VTN","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-3-0-vtn-2g-o-ring-2nd-generation-wba-3-0-series-viton","title":"WBO-3.0-VTN-2G O-ring 2nd generation WBA-3.0 series Viton","description":"\u003cp\u003e\u003cspan\u003eAlternate O-ring for all 2nd generation WBA-3.0 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Viton Fluoroelastomer rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -18 to 204°C (0 to 400°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBenzene\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eNitric Acid\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eTransmission Fluid\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963538805047,"sku":"WBO-3.0-VTN-2G","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-4-0-bnn-o-ring-wba-4-0-series-buna-n","title":"WBO-4.0-BNN O-ring WBA-4.0 series Buna N","description":"\u003cp\u003e\u003cspan\u003eReplacement O-ring for the standard o-ring in all WBA-4.0 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Buna N rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -29 to 120°C (-20 to 250°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcetic Acid\u003c\/li\u003e\n\u003cli\u003eAmmonia\u003c\/li\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003ePotassium Hydroxide\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003cli\u003eWater\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963546669367,"sku":"WBO-4.0-BNN","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-4-0-sil-o-ring-wba-4-0-series-silicone","title":"WBO-4.0-SIL O-ring WBA-4.0 series Silicone","description":"\u003cp\u003e\u003cspan\u003eAlternate O-ring for all WBA-4.0 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Silicone rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -51 to 232°C (-60 to 450°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963555320119,"sku":"WBO-4.0-SIL","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-5-75-sil-o-ring-wba-5-75-series-silicone","title":"WBO-5.75-SIL O-ring WBA-5.75 series Silicone","description":"\u003cp\u003e\u003cspan\u003eAlternate O-ring for all WBA-5.75 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Silicone rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -51 to 232°C (-60 to 450°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eDiluted Salt Solutions\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963561972023,"sku":"WBO-5.75-SIL","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wbo-5-75-bnn-o-ring-wba-5-75-series-buna-n","title":"WBO-5.75-BNN O-ring WBA-5.75 series Buna N","description":"\u003cp\u003e\u003cspan\u003eReplacement O-ring for the standard o-ring in all WBA-5.75 series water blocks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from Buna N rubber.\u003c\/li\u003e\n\u003cli\u003eTemperature range: -29 to 120°C (-20 to 250°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor use with;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAcetic Acid\u003c\/li\u003e\n\u003cli\u003eAmmonia\u003c\/li\u003e\n\u003cli\u003eAmmonium Hydroxide\u003c\/li\u003e\n\u003cli\u003eAnimal Oils\u003c\/li\u003e\n\u003cli\u003eBases\u003c\/li\u003e\n\u003cli\u003eBoric Acid\u003c\/li\u003e\n\u003cli\u003eButyl Alcohol\u003c\/li\u003e\n\u003cli\u003eCalcium Hydroxide\u003c\/li\u003e\n\u003cli\u003eCitric Acid\u003c\/li\u003e\n\u003cli\u003eEthanol\u003c\/li\u003e\n\u003cli\u003eEthylene Glycol\u003c\/li\u003e\n\u003cli\u003eGlycerin\u003c\/li\u003e\n\u003cli\u003eGrease\u003c\/li\u003e\n\u003cli\u003eHydraulic Oils\u003c\/li\u003e\n\u003cli\u003eIsopropyl Alcohol\u003c\/li\u003e\n\u003cli\u003eMethanol\u003c\/li\u003e\n\u003cli\u003eMineral Oils\u003c\/li\u003e\n\u003cli\u003eMotor Oil\u003c\/li\u003e\n\u003cli\u003ePetroleum Fluids\u003c\/li\u003e\n\u003cli\u003ePhosphoric Acid\u003c\/li\u003e\n\u003cli\u003ePotassium Hydroxide\u003c\/li\u003e\n\u003cli\u003eSodium Bicarbonate\u003c\/li\u003e\n\u003cli\u003eVegetable Oils\u003c\/li\u003e\n\u003cli\u003eWater\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963568460087,"sku":"WBO-5.75-BNN","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wbo-3.0-01_1200.jpg?v=1755454224"},{"product_id":"wba-1-00-0-49-cu-01-water-block-1-0-x-1-0-x-0-49-copper","title":"WBA-1.00-0.49-CU-01 Water Block 1.0 x 1.0 x 0.49\" Copper","description":"\u003cp\u003e\u003cstrong\u003eMini Micro Liquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.00-0.49-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.0 x 1.0 x 0.49\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 25.4 x 25.4mm (1.0 x 1.0 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.0 x 1.0 x 0.49 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 1.0 x 1.0 inches (25.4 x 25.4 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 1.61 ml.\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 25 x 25mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 25 x 55mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Copper.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50963589169463,"sku":"WBA-1.00-0.49-CU-01","price":96.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.0-cu_1000.jpg?v=1755456199"},{"product_id":"wba-1-25-0-50-cu-np-water-block-1-25-x-1-25-x-0-50-copper","title":"WBA-1.25-0.50-CU-NP Water Block 1.25 x 1.25 x 0.50\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.25-0.50-CU-NP\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.25 x 1.25 x 0.50\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 31.7 x 31.7mm (1.25 x 1.25 inches) on each side.\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon or Stainless Steel barbed fittings for 1\/4\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] and then Nickel plated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cp\u003eVery high surface area internal flow path for maximum heat transfer.\u003cbr\u003eMeasures: 1.25 x 1.25 x 0.50 inches.\u003cbr\u003eUsable flat area of 1.25 x 1.25 inches (31.7 x 31.7 mm) per side.\u003cbr\u003eInlet and Outlet on the same side.\u003cbr\u003e1\/8\" NPT threaded inlet and outlet.\u003cbr\u003eOption to add 2 pieces of Nylon barbed fittings for 1\/4\" ID tubing.\u003cbr\u003eMaximum service temperature is 150 C.\u003cbr\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/p\u003e\n\u003cp\u003eThis copper liquid cold plate will accommodate per side;\u003c\/p\u003e\n\u003cp\u003eAny object to be cooled up to 31.7 x 31.7mm.\u003cbr\u003eSingle TECs or TEGs up to 31.7 x 31.7mm.\u003c\/p\u003e\n\u003cp\u003eCNC machined from solid Copper and then Nickel plated.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to 200 watts. All indications showed that it could handle higher loads.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964537606455,"sku":"WBA-1.25-0.50-CU-NP","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-1.25-0.5-cu-np_1000.jpg?v=1755482409"},{"product_id":"wba-1-62-0-55-cu-01-water-block-1-62-x-1-62-x-0-55-copper","title":"WBA-1.62-0.55-CU-01 Water Block 1.62 x 1.62 x 0.55\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-1.62-0.55-CU-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 1.62 x 1.62 x 0.55\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eEach side has usable area of 41.0 x 41.0mm (1.62 x 1.62 inches).\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eWeight: 160g (0.353 lb)\u003c\/li\u003e\n\u003cli\u003eTotal External surface Area: 9.285 in\u003csup\u003e2\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e(59.9 cm\u003csup\u003e2\u003c\/sup\u003e)\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 1.62 x 1.62 x 0.55 inches.\u003c\/li\u003e\n\u003cli\u003eEach side usable flat area of 1.62 x 1.62 inches (41.0 x 41.0 mm).\u003c\/li\u003e\n\u003cli\u003eBoth sides may be used at the same time.\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 0.360 inches\u003csup\u003e3\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e(5.90 cm\u003csup\u003e3\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eor ml)\u003c\/li\u003e\n\u003cli\u003e2 mounting lugs with holes.\u003c\/li\u003e\n\u003cli\u003eSolder brazed 100 psi watertight seal.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/16\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of Nylon barbed fittings for 3\/16\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 150 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis aluminum liquid cold plate waterblock will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 41 x 41mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 20 x 20mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid copper, alloy 110, also known as ETP copper. [99.9% pure copper for maximum thermal conductivity].\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964543537463,"sku":"WBA-1.62-0.55-CU-01","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wb-1.62-1.62-block_cover-2_600_1.jpg?v=1755482629"},{"product_id":"wba-3-0-0-85-al-r2-water-block-3-0-x-3-0-x-0-85-r2","title":"WBA-3.0-0.85-AL-R2 Water Block 3.0 x 3.0 x 0.85\" R2","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.85-AL-R2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInlet and Outlet on opposite sides\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.85\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 243 grams (0.54 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 3.0 x 3.0 x 0.85 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is XXX ml.\u003c\/li\u003e\n\u003cli\u003e8 mounting holes tapped for 6-32 screws\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eInlet and Outlet on opposite sides\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWill accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 65 x 65mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964553269559,"sku":"WBA-3.0-0.85-AL-R2","price":137.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-3.0-0.9-al-r2_500_1.jpg?v=1755483218"},{"product_id":"wba-3-00-0-90-al-2g-2nd-generation-water-block-2g-3-0-x-3-0-x-0-90","title":"WBA-3.00-0.90-AL-2G 2nd generation Water Block 2G 3.0 x 3.0 x 0.90\"","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.90-AL-2G\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.90\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 232 grams (0.51 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2nd Generation Design with improved fluid flow and recessed screw heads\u003c\/li\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 3.0 x 3.0 x 0.90 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is XXX ml.\u003c\/li\u003e\n\u003cli\u003e8 mounting holes tapped for 6-32 screws\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis waterblock will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 65 x 65mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/p\u003e\n\u003cp\u003eThis aluminum liquid cold plate water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative O-ring materials are available as an option.  Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964561363255,"sku":"WBA-3.0-0.85-AL-R2","price":116.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-3.00-0.90-al-2g_render_assembly_iso_1600x1236_7bd6388b-ce92-43c4-af88-fbd42b68190a.jpg?v=1755483130"},{"product_id":"wba-3-00-0-90-cu-2g-2nd-generation-water-block-3-0-x-3-0-x-0-90-copper","title":"WBA-3.00-0.90-CU-2G 2nd generation Water Block 3.0 x 3.0 x 0.90\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.90-CU-2G\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.90\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 771gm (1.70 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2nd Generation\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edesign with improved flow path, reduced pressure drop, and lighter in weight.\u003c\/li\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eMeasures: 3.0 x 3.0 x 0.90 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 2.56 x 2.56 inches (65.0 x 65.0 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 2.67 cubic inches, 43.77 ml.(cm3)\u003c\/li\u003e\n\u003cli\u003e8 mounting holes tapped for 6-32 screws\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on the same side.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eMaximum service temperature is 125 C.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis waterblock will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 65 x 65mm.\u003c\/li\u003e\n\u003cli\u003e2, 3, or 4 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC machined from solid 99.9% pure copper.\u003c\/p\u003e\n\u003cp\u003eThis copper liquid cold plate waterblock has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eStandard\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eO-ring\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ematerial is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us if you need other materials.\u003c\/p\u003e\n\u003cp\u003eClick here to see\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/customthermoelectric.com\/catalogsearch\/result\/?q=WBO-3.0\" target=\"_blank\"\u003e3.0 Inch O-rings\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall or Email us for custom options or to create custom Liquid Cold Plates for you.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964572864823,"sku":"WBA-3.00-0.90-CU-2G","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-3.00-0.90-cu-2g_render_assembly_iso_1550x1236_944e6f76-d938-49c9-af18-98bd1855cfb9.jpg?v=1755483347"},{"product_id":"wba-4-0-0-92-al-01-water-block-4-0-x-4-0-x-0-92","title":"WBA-4.0-0.92-AL-01 Water Block 4.0 x 4.0 x 0.92\"","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-4.0-0.92-AL-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 4.0 x 4.0 x 0.92\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 90 x 90mm (3.54 x 3.54 inches).\u003c\/li\u003e\n\u003cli\u003eWeight (without brass fittings): 473g (1.04 lb) Brass fittings weigh 24g (0.053 lb) each.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/li\u003e\n\u003cli\u003eO-ring watertight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eAnnodized clear for corrosion protection.\u003c\/li\u003e\n\u003cli\u003eMeasures: 4.0 x 4.0 x 0.92 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 3.54 x 3.54 inches (90 x 90 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 73.2 ml (4.467 in^3)\u003c\/li\u003e\n\u003cli\u003e10 mounting holes tapped for 6-32 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on opposite sides.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWill accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 40 x 40mm.\u003c\/li\u003e\n\u003cli\u003e2 to 8 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of aluminum with an O-ring seal. Internal flow path is easily serviceable by removing screws and cover.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964577517879,"sku":"WBA-4.0-0.92-AL-01","price":210.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-4.0-0.9-al-01_500_1.jpg?v=1755483523"},{"product_id":"wba-4-0-0-92-cu-01-water-block-4-0-x-4-0-x-0-92-copper","title":"WBA-4.0-0.92-CU-01 Water Block 4.0 x 4.0 x 0.92\" Copper","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-3.0-0.90-CU-2G\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 3.0 x 3.0 x 0.90\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 65.0 x 65.0mm (2.56x 2.56 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: 771gm (1.70 lb)\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID tubing.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper [Alloy CU 110, 99.9% pure Copper] .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid copper.\u003c\/li\u003e\n\u003cli\u003eMeasures: 4.0 x 4.0 x 0.92 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 3.54 x 3.54 inches (90 x 90 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is XXX ml.\u003c\/li\u003e\n\u003cli\u003e10 mounting holes tapped for 6-32 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on opposite sides.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWill accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 40 x 40mm.\u003c\/li\u003e\n\u003cli\u003e2 to 8 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of copper with an O-ring seal. Internal flow path is easily serviceable by removing screws and cover.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964582203703,"sku":"WBA-4.0-0.92-CU-01","price":301.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-4.0-0.9-al-01_500_1_3.jpg?v=1755483725"},{"product_id":"wba-4-0-1-1-al-cc-water-block-4-0-x-4-0-x-1-1-cbored-cover","title":"WBA-4.0-1.1-AL-CC Water Block 4.0 x 4.0 x 1.1\" Cbored Cover","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-4.0-1.1-AL-CC\u003c\/li\u003e\n\u003cli\u003eSame as standard WBA-4.0-0.92-AL-01 Except with thicker (0.39\") cover with counter bored holes for screws. Provides a flat surface with no screw heads protruding.\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 4.0 x 4.0 x 1.09\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 90 x 90mm (3.54 x 3.54 inches).\u003c\/li\u003e\n\u003cli\u003eWeight without brass fittings: 562 grams (1.239 lb), Brass fittings weigh 24g (0.053 lb) each.\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid Alloy 6061 aluminum billet. Anodized clear.\u003c\/li\u003e\n\u003cli\u003eO-ring watertight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSame as standard WBA-4.0-0.92-AL-01 Except with thicker (0.37\") cover with counter bored holes for screws. Provides a flat surface with no screw heads protruding.\u003c\/li\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eAnnodized clear for corrosion protection.\u003c\/li\u003e\n\u003cli\u003eMeasures: 4.0 x 4.0 x 1.09 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 3.54 x 3.54 inches (90 x 90 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 73.2 ml (4.467 in^3).\u003c\/li\u003e\n\u003cli\u003e10 mounting holes tapped for 6-32 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on opposite sides.\u003c\/li\u003e\n\u003cli\u003e3\/8\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWill accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 90 x 90mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 40 x 40mm.\u003c\/li\u003e\n\u003cli\u003e2 to 8 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of aluminum with an O-ring seal. Internal flow path is easily serviceable by removing screws and cover.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1200 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative o-ring materials are available as an option. Please contact us.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964586103095,"sku":"WBA-4.0-1.1-AL-CC","price":229.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-4.00-0.92-al-cc_assembled_2560x1600_f0c7e88b-9f96-42ad-9163-065c3ce3394a.jpg?v=1755483933"},{"product_id":"wba-5-75-1-15-al-01-water-block-5-75-x-5-75-x-1-15","title":"WBA-5.75-1.15-AL-01 Water Block 5.75 x 5.75 x 1.15\"","description":"\u003cp\u003e\u003cstrong\u003eLiquid Cold Plate Water Block Assembly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: WBA-5.75-1.15-AL-01\u003c\/li\u003e\n\u003cli\u003eOverall body dimensions: 5.75 x 5.75 x 1.15\" (L x W x H).\u003c\/li\u003e\n\u003cli\u003eUsable area of 132 x 132mm (5.20 x 5.20 inches).\u003c\/li\u003e\n\u003cli\u003eWeight: XXX (0.XX lb)\u003c\/li\u003e\n\u003cli\u003e3\/8\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eCNC machined from solid Alloy 6061 aluminum billet.\u003c\/li\u003e\n\u003cli\u003eO-ring watertight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLiquid heat exchanger to rapidly remove heat from the hot side of TECs, TEGs, or just about any component. Most efficient method of removing heat from multiple TECs or TEGs.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVery high surface area internal flow path for maximum heat transfer.\u003c\/li\u003e\n\u003cli\u003eAnnodized clear for corrosion protection.\u003c\/li\u003e\n\u003cli\u003eMeasures: 5.75 x 5.75 x 1.15 inches.\u003c\/li\u003e\n\u003cli\u003eUsable flat area of 5.20 x 5.20 inches (132 x132 mm).\u003c\/li\u003e\n\u003cli\u003eLiquid volume (internal) is 205 ml.\u003c\/li\u003e\n\u003cli\u003e18 mounting holes tapped for 6-32 screws.\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet on opposite sides.\u003c\/li\u003e\n\u003cli\u003e3\/8\" NPT threaded inlet and outlet.\u003c\/li\u003e\n\u003cli\u003eOption to add 2 pieces of brass barbed fittings for 1\/2\" ID Tube.\u003c\/li\u003e\n\u003cli\u003eManufactured and assembled in Bishopville, MD U.S.A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis aluminum liquid cold plate will accommodate;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAny object to be cooled up to 132 x 132mm such as IGBTs, MOSFETS, sensors, circuit boards, etc.\u003c\/li\u003e\n\u003cli\u003eSingle TECs or TEGs up to 132 x 132mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 62 x 62mm.\u003c\/li\u003e\n\u003cli\u003e2 to 4 TECs or TEGs up to 50 x 50mm.\u003c\/li\u003e\n\u003cli\u003e2 to 9 TECs or TEGs up to 40 x 40mm.\u003c\/li\u003e\n\u003cli\u003e2 to 16 TECs or TEGs up to 30 x 30mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCNC Machined from a solid billet of aluminum with an O-ring seal. Internal flow path is easily serviceable by removing screws and cover.\u003c\/p\u003e\n\u003cp\u003eThis water block has been tested with a heat load of up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1600 watts\u003c\/strong\u003e. All indications showed that it could handle higher loads.\u003c\/p\u003e\n\u003cp\u003eO-ring material is Buna-N which is capable of fluid temperatures from -29 to +120 C. Alternative O-ring materials are available as an option. Please contact us.\u003c\/p\u003e\n\u003cp\u003ePlease call or email to discuss custom options or we can design and make customized Liquid Cold Plates for your application.\u003c\/p\u003e","brand":"Custom Thermoelectric","offers":[{"title":"Default Title","offer_id":50964588888375,"sku":"WBA-5.75-1.15-AL-01","price":301.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0771\/1568\/7223\/files\/wba-5.75-1.15-al-01_700_1.jpg?v=1755484105"}],"url":"https:\/\/efc0ce.myshopify.com\/collections\/water-blocks-liquid-cold-plates.oembed","provider":"Custom Thermoelectric","version":"1.0","type":"link"}